Equipment Overview



Max2100S DIGI VAC Stanchion unit - is the unit that is placed between the roll unwind (Paper Processor) and the printer. The paper is webbed through the unit prior to entering the Océ, IBM, or Xerox continuous form printers.


Order # M2100S


UL Listed
CSA Approved

Main Functions:
  • Removes all chad and paper dust before the paper enters the printer. - Works with pin fed or pinless paper.
  • Removes static from the paper for a more effective cleaning and assurance of high print quality under all conditions.
  • Scrubs the paper on the top and bottom to prevent early developer/toner contamination and premature wear and tear on the printer and post processing equipment.

Physical Characteristics:
  • Height: 44 inches
  • Width: 26 inches
  • Depth: 36 inches
  • Weight: 85 lbs

Installation Requirements:
  • 34 Inch distance between the paper leaving the roll unwind and where it enters the printer.
  • Approx. 70 Inch distance between the base of the printer and the base of the Roll Unwind.
  • Can be made to fit in as little as 18 inches of space.

Electrical Specifications:
  • 115 Volts
  • 1 phase
  • 4 Amp
  • 50/60 Hz
  • Grounded

Paper Specifications:
  • 8 lb to 100 lb Bond

Room Humidity Level:
  • 0% to 80%


Maximum Throughput Technologies, Inc.
4000 Embassy Parkway, Suite 208
Akron, Ohio 44333
Phone: 330-666-3559
Fax: 330-666-2707